Trademaster WA-ABM14 Plate And Pipe Bevelling Machine
WA-ABM14 is a bevelling machine designed to bevel plates and pipes made of carbon steel, alloy steel, stainless steel or aluminium alloys.
In just one single run the machine can bevel up to 2.6 m/min. (8.5 ft/min.) to a width of 12 mm (1/2’’) in workpieces with tensile strength of Rm ≤ 392 MPa (57,000 psi).
Maximum bevel width is 14 mm (9/16’’). Depending on materials two or more runs are needed. Bevel angles incl. 30° (standard) and with optional angle variation devices also 22.5°, 25°, 35°, 37.5° or 45°. The machine can bevel plates from the top and bottom.
In the case of the milling tool getting stuck in the material and beveling cannot be continued the direction of rotation of the tool can be reversed to release the machine from the workpiece.
There is no need to wear acoustic protection equipment because the noise produced by the machine does not exceed 70 dB.
Fast and efficient
Bevels both small and large pieces to cover most of the common applications for its type
Auto feed on large plates with optional trolley
Beveling of lower edge in inverted position
Standard shearing cutter for machining carbon steel
2 optional shearing cutters dedicated to stainless/alloyed steel and aluminum
Reversible spindle against stuck milling tool
Versatile and transportable on its own trolley
300-400 V / 50-60 Hz
Maximum bevel width
up to 14 mm (9/16″)
Bevel angle range
(ß – depending on angle device in use)